View BZG03C150_741114.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

BZG03C15 Series 600 Watt Peak Power Zener Surge Rated Voltage Regulators
The SMA series is supplied in ON Semiconductor's exclusive, cost-effective, highly reliable SURMETICt package and is ideally suited for use in communication systems, automotive, numerical controls, process controls, medical equipment, business machines, power supplies and many other industrial/consumer applications. This new line of 1.5 watt Zener diodes offers the following advantages:
Specification Features: http://onsemi.com
* * * * * * *
PLASTIC SURFACE MOUNT ZENER VOLTAGE REGULATORS 600 WATTS PEAK POWER
Standard Zener Breakdown Voltage - 15 V to 150 V Peak Power 600 Watts @ 100 s ESD Rating of Class 3 (> 16 KV) per Human Body Model Response Time is Typically < 1.0 ns Flat Handling Surface for Accurate Placement Package Design for Top Slide or Bottom Circuit Board Mounting Low Profile Package
CATHODE
ANODE
Mechanical Characteristics: CASE: Void-free, transfer-molded plastic FINISH: All external surfaces are corrosion resistant and leads are
readily solderable
MAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES:
SMA CASE 403D PLASTIC
260C for 10 Seconds
POLARITY: Cathode indicated by molded polarity notch or polarity MARKING DIAGRAM
band
MOUNTING POSITION: Any MAXIMUM RATINGS
Please See the Table on the Following Page xx LL Y WW = Specific Device Code = (See Table on Page 2) = Assembly Location = Year = Work Week xx LLYWW
ORDERING INFORMATION
Device * BZG03C15 BZG03C150 Package SMA SMA Shipping 5000/Tape & Reel 5000/Tape & Reel
For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D.
(c) Semiconductor Components Industries, LLC, 2004
1
January, 2004 - Rev. 3
Publication Order Number: BZG03C15/D
BZG03C15 Series
MAXIMUM RATINGS
Rating Peak Power Dissipation (Note 1) @ TL = 25C, tP = 100 ms DC Power Dissipation @ TL = 75C Measured Zero Lead Length (Note 2) Derate Above 75C Thermal Resistance from Junction to Lead Forward Surge Current (Note 3) @ TA = 25C Operating and Storage Temperature Range Symbol PZSM PD Value 600 1.5 20 50 40 -65 to +150 Unit W W mW/C C/W A C
RqJL IFSM TJ, Tstg
1. 100 ms, non-repetitive square pulse 2. 1 square copper pad, FR-4 board 3. 1/2 sine wave (or equivalent square wave), PW = 8.3 ms, duty cycle = 4 pulses per minute maximum
I IF
SYMBOLS DEFINITIONS
Symbol IPP VC VRWM Parameter Maximum Reverse Peak Pulse Current Clamping Voltage @ IPP Working Peak Reverse Voltage Maximum Reverse Leakage Current @ VRWM Breakdown Voltage @ IT Test Current Forward Current Forward Voltage @ IF
VC VBR VRWM IR VF IT
V
IR VBR IT IF
IPP
VF
Uni-Directional TVS
ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted, VF = 1.2 V Max. @ IF = 0.5 A for all types)
VRWM (Note 4) Volts 11 110 Breakdown Voltage IR @ VRWM mA 1 1 VBR (V) (Note 5) Min 13.8 138 Nom 15.0 150 Max 15.6 156 @ IT mA 50 5
Typ
Zzt @ IT
Max
Device BZG03C15 BZG03C150
Device Marking G15 G150
W 5.0 130
W 10.0 300
4. A transient suppressor is normally selected according to the working peak reverse voltage (VRWM), which should be equal to or greater than the DC or continuous peak operating voltage level 5. VBR measured at pulse test current IT at an ambient temperature of 25C
http://onsemi.com
2
BZG03C15 Series
RATING AND TYPICAL CHARACTERISTIC CURVES
100 NONREPETITIVE PULSE WAVEFORM SHOWN IN FIGURE 2. TA = 25C
10,000 MEASURED AT ZERO BIAS TJ = 25C f = 1 MHz Vsig = 50 mVp-p
Ppk , PEAK POWER (kW)
C, CAPACITANCE (pF)
10
1,000
1
100
MEASURED AT STAND-OFF VOLTAGE, VWM
0.1
10-4
0.001
0.01 0.1 tP, PULSE WIDTH (ms)
1
10
10
1
2
5 10 20 50 V(BR), BREAKDOWN VOLTAGE (VOLTS)
100 200
Figure 1. Pulse Rating Curve
Figure 3. Typical Junction Capacitance
6 5 4 3 2 1 0 @ TA = 25C PD = 0.5 W 0 25 50 75 100 T, TEMPERATURE (C) 125 150 @ TL = 75C PD = 1.5 W
PEAK PULSE DERATING IN % OF PEAK POWER OR CURRENT
100 80 60 40 20 0
10 x 1000 WAVEFORM AS DEFINED BY R.E.A.
0
40
80 120 160 TA, AMBIENT TEMPERATURE (C)
200
PD , MAXIMUM POWER DISSIPATION (WATTS)
120
Figure 2. Pulse Derating Curve
Figure 4. Steady State Power Derating
http://onsemi.com
3
BZG03C15 Series
PACKAGE DIMENSIONS
SMA CASE 403D-02 ISSUE A
S A
NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 403D-01 OBSOLETE, NEW STANDARD IS 403D-02.
D
B
DIM A B C D H J K S
POLARITY INDICATOR OPTIONAL AS NEEDED
INCHES MIN MAX 0.160 0.180 0.090 0.115 0.075 0.095 0.050 0.064 0.002 0.006 0.006 0.016 0.030 0.060 0.190 0.220
MILLIMETERS MIN MAX 4.06 4.57 2.29 2.92 1.91 2.41 1.27 1.63 0.05 0.15 0.15 0.41 0.76 1.52 4.83 5.59
C
K
J
H
SURMETIC is a trademark of Semiconductor Components Industries, LLC.
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051 Phone: 81-3-5773-3850 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative.
http://onsemi.com
4
BZG03C15/D

▲Up To Search▲

Price & Availability of BZG03C150

	To Download BZG03C150 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .